How to Make a Roof Top Tent - [15 Detailed Ways 2023]

What’s the best way to enjoy nature and the great outdoors? Some might say camping, while others might say hiking. But for those who want the best of both worlds, they’ll agree that rooftop tent camping is the way to go! This guide will show you how to make your very own rooftop tent—all you need is a few simple materials and some basic carpentry skills. So read on, and get ready to hit the open road!

15 detailed ways to make a rooftop tent:

1. Decide on the size of your tent:

Rooftop tents come in a variety of sizes, so it’s important to choose one that will comfortably accommodate you and your camping gear. If you’re unsure, err on the side of larger rather than smaller.

2. Cut the plywood for the base and walls of your tent:

Using a circular saw, cut four pieces of plywood to the following dimensions:

• 2 pieces for the base, each measuring 1.8m x 1.2m (6ft x 4ft)
• 2 pieces for the walls, each measuring 2.1m x 1.2m (7ft x 4ft)

3. Assemble the frame of your tent:

To make the frame of your rooftop tent, you’ll need to cut eight lengths of 2x4 lumber to the following dimensions:

• 4 pieces measuring 1.8m (6ft) long
• 4 pieces measuring 2.1m (7ft) long

Then, use a drill and screws to secure the frame together. Make sure that the shorter pieces are at the base of the frame, and the longer pieces are at the sides.

4. Cut the fabric for your tent:

Using a sharp pair of scissors, cut four pieces of fabric to the following dimensions:

• 2 pieces for the walls, each measuring 2.1m x 1.2m (7ft x 4ft)
• 2 pieces for the roof, each measuring 1.8m x 1.2m (6ft x 4ft)

5. Attach the fabric to the frame of your tent:

To do this, simply use a staple gun to secure the fabric to the frame. Start with one of the wall pieces, and make sure that the fabric is pulled taut as you staple it in place. After that, you will need to do the same for the other wall piece, followed by the two pieces of fabric you will need for the roof.

6. Cut and attach the mosquito netting:

To keep mosquitoes and other insects out of your tent, you’ll need to cut four pieces of mosquito netting to the following dimensions:

• 2 pieces for the walls, each measuring 2.1m x 1.2m (7ft x 4ft)
• 2 pieces for the roof, each measuring 1.8m x 1.2m (6ft x 4ft)

Then, use a staple gun to attach the mosquito netting to the frame of your tent. Ensure that the netting is taut before you staple it in place, and that it is also pulled taut as you staple it in place.

7. Install the rain fly:

To keep yourself dry in case of rain, you’ll need to install a rain fly on your tent. To do this, cut two pieces of fabric to the following dimensions:

• 2 pieces for the roof, each measuring 1.8m x 1.2m (6ft x 4ft)

Then, use a waterproofing spray or sealant to treat the fabric. This will help ensure that water doesn’t seep through in the event of a downpour.

Next, use a staple gun to attach the rain fly to the frame of your tent. Make sure that the fabric is pulled taut as you staple it in place.

8. Make the door for your tent:

To make the door for your tent, you’ll need to cut two pieces of fabric to the following dimensions:

• 1 piece measuring 1.2m x 0.9m (4ft x 3ft)
• 1 piece measuring 1.2m x 0.6m (4ft x 2ft)

Then, use a waterproofing spray or sealant to treat the fabric. If there was a downpour, this will help to ensure that water won’t seep through in the event of it raining heavily.

Next, use a staple gun to attach the two pieces of fabric together, making sure that the smaller piece is at the top. Then, fold over the top and bottom edges of the door and staple them in place.

Finally, use a drill to install two eyelets near the top of the door. This will be where you tie the door closed when you’re not using it.

9. Make the windows for your tent:

To let in some light and fresh air, you’ll need to cut four pieces of fabric to the following dimensions:

• 2 pieces measuring 0.6m x 0.9m (2ft x 3ft)
• 2 pieces measuring 0.6m x 0.6m (2ft x 2ft)

Then, use a waterproofing spray or sealant to treat the fabric. This will help ensure that water doesn’t seep through in the event of a downpour.

Next, use a staple gun to attach the four pieces of fabric together, making sure that the smaller pieces are at the top and bottom. Then, fold over the top and bottom edges of the windows and staple them in place.

Finally, use a drill to install two eyelets near the top of each window. This will be where you tie the windows closed when you’re not using them.

10. That’s it! Your tent is now complete:

You can now use your tent for camping, backyard sleepovers, or any other outdoor adventure. Just make sure to take it down when you’re not using it, and store it in a dry place to keep it in good condition.

Read : How to Stake a Tent

Conclusion

Have you ever tried camping in a rooftop tent? If not, we definitely recommend giving it a try! Not only is it a unique experience that allows you to get up close and personal with nature, but it’s also really comfortable and can be set up in minutes. Plus, if you have a rooftop tent from us, you know your investment is quality and will last for years.

So what are you waiting for? Give rooftop camping a try today! And if you have any questions or comments, feel free to reach out to us – we’d love to hear from you.